034motorsport Dynamic+ Coil Spring Sleeves

Dynamic+ Coil Spring Sleeves are designed to help dampen noise and reduce paint wear caused by contact between coils on springs under heavy load, while maintaining a constant spring rate throughout the range of travel. These coil spring sleeves are...

034motorsport 4” Turbo Inlet Pipe Adapter Ring for TTE625 & TTE700

Product Description: This is a 62.8mm billet aluminum adapter ring designed for use with the 034Motorsport 4” Turbo Inlet Pipe and TTE625 or TTE700 aftermarket turbochargers from The Turbo Engineers. This billet aluminum adapter ring is...

Black Audi Rings for RS Style Grille

For those who have installed one of our RS style grilles and wish to change the front rings to gloss black. Please note these will only fit RS style grilles, and will not fit the original grille. To replace the rings, it is recommended to have the...

Rear Subframe Mount Stretch Bolt Kit, 8V/8V.5 Audi A3/S3 Quattro, MkIII Audi TT/TTS Quattro, & MkVII Volkswagen Golf R (MQB)

Complete factory rear subframe bolt kit for the 8V/8V.5 Audi A3/S3 Quattro, MkIII Audi TT/TTS Quattro, & MkVII Volkswagen Golf R. We always recommend using new factory stretch bolts to install the 034Motorsport MQB Audi/Volkswagen AWD Rear...

Emmanuele Design 8V A3/S3/RS3 Low Profile Cell Mount

Free shipping in the US! We are pleased to release our low profile phone mount for the Audi A3/S3 8V platform! Gone are the days of holding your phone in your hand or lap. With our strong magnetic mount, your phone can be placed in your line of sight,...

Unitronic 2.5TFSI EVO Wastegate Line Upgrade

Description Unitronic's Wastegate Line Upgrade Kit for the 2.5TFSI EVO (DAZA) engines, was designed to replace the OEM plastic line that is prone to failure and features a robust silicone construction that will endure the high temperatures found...

Billet Aluminum MQB Upper Dogbone Mount Insert, MkVII VW Golf/GTI/R, MkVII VW GLI, 8V/8V.5 Audi A3/S3/RS3 & MkIII Audi TT/TTS/TTRS

The 034Motorsport MQB Upper Dogbone Mount Insert (patent pending) is required for any MQB platform MkVII VW Golf/GTI/R, MkVII VW GLI, 8V/8V.5 Audi A3/S3/RS3 & MkIII Audi TT/TTS/TTRS using an aftermarket dogbone mount and dogbone mount insert...

034Motorsport Billet Aluminum Shifter Bracket Bushing Kit for Manual Transmissions

We're proud to announce the availability of the 034Motorsport Billet Aluminum Shifter Bracket Bushing Kit for transverse Audi & Volkswagen vehicles with manual transmissions! Designed to improve shift quality and precision, these clear-anodized...

Emmanuele Design 8V A3/S3/RS3Swivel Cell Phone Mount

Free shipping in the US! We are pleased to release our adjustable swivel phone mount for the Audi A3/S3 8V platform! Gone are the days of holding your phone in your hand or lap. With our strong magnetic mount, your phone can be placed in your line...

CTS Turbo Gen3 TSI Electronic Wastegate Actuator Extension Harness

Description With our Gen 3 Electronic Wastegate Actuator Extension Harness, you no longer need the turbo on the engine to check and adjust the wastegate voltage. You can set the wastegate voltage on your new turbo/actuator outside of the car before...

034 Motorsport Billet Aluminum MQB Lower Dogbone Mount Insert, MkVII VW Golf/GTI/R, MkVII VW GLI, 8V/8V.5 Audi A3/S3/RS3 & MkIII Audi TT/TTS/TTRS

 Please Note: Some Mk7 GTI & Golf R models are equipped with a different factory dogbone mount. To ensure fitment on your vehicle, please visually verify the mount you have using this guide, then select the Version 1 or Version 2 insert...

034motorsport X34 EVO Intake Adapter for 2019+ Audi 8V.5 RS3 and 8S TTRS

Product Description: Those that are looking to upgrade the intake on a 2019+ Audi RS3 or TTRS will notice their diverter valve hose is a different design than those on earlier model vehicles. Without an adapter, intakes for earlier versions of these...